Manufacturer of Custom Triple Trees for any brand motorcycle! Domestic or imported!!
Put the custom front End you want on the motorcycle you have !

parts and accessories

if you don't see what you're looking for, Contact us. we can custom machine anything You need.

Buying, selling or trading new and used motorcycle parts or accessories? Visit our friends at Action Motorcycles for bottom line pricing. 

41mm Lower Leg Clamp
Fork Locks
Turning Signal / Universal Windshield Mounts
Headlight Adapter Bracket
Custom Fork Braces
Steering Control Dampener

41mm Lower Leg Clamp
To be used with 41mm lower leg covers. The lower leg clamps we make for Harley Davidson can be ordered in any of the 5 rake angles. They clamp on the fork tube under the bottom tree and mount lower leg covers at the same rake angle as the trees. The finish is polished and sold in pairs.

Fork Locks
We make external style fork locks for all of our Custom Triple Trees. Shown are several lock plates. These are stock replacement for Harley-Davidson frames. We make fork locks and frame tabs for all bikes domestic and metric.
Contact Us
to verify compatibility

Turning Signal / Universal Windshield Mounts
We make these turning signal mounts to fit any fork tube size. The sizes stocked are 35,36,37,38,39,40,41,43,45,,48,49 and 50 mm. They are highly polished an are sold in pairs.

Headlight Adapter Bracket
This bracket will accept the stock top mount headlight used on most Harley-Davidson 35mm and 39mm narrow glide models. It is necessary to use this bracket to maintain that headlight.

Custom Fork Braces
These are our custom fork braces. Shown is a 39mm mid glide brace. It attaches to the top of the lower leg. We manufacture these braces to fit all different width front ends. On some metric model bikes this style of brace cannot be used. The lower leg is not machined to accept the clamp.
Contact Us for applications and measurement.
The cost for these braces start at $325.00 and are built to order.


Steering Control Dampener
Most of our Custom Triple Trees can be set up to use an adjustable steering dampener. One end mounts to our extended stainless steel pinch nut, the other to a frame bracket [not supplied]. This dampener has various tension settings to allow steering control for all riding conditions.


 


Custom Triple Trees by Machine And Design
Email: bill@customtripletrees.com
Copyright © 2021 · All Rights Reserved · customtripletrees.com